P2C70: The traction motor phase Z current A is below normal
The traction motor phase Z current A is below normal. It may be the part itself, its connector or the wiring.
| Code | P2C70 |
|---|---|
| System | Engine and transmission |
| Group | P2Cxx, Engine, emissions and electrification |
| Type | Generic: it means the same on every make |
How to read and clear P2C70 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2C70 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2C6C There is a fault in the traction motor phase Y current A
- P2C6D The traction motor phase Y current A is below normal
- P2C6E The traction motor phase Y current A is above normal
- P2C6F There is a fault in the traction motor phase Z current A
- P2C71 The traction motor phase Z current A is above normal
- P2C72 The high voltage electronics cooling system gives readings outside the normal
- P2C73 The active grille air shutter C has got stuck
- P2C74 The active grille air shutter C control gives readings outside the normal range
What does code P2C70 mean?
The traction motor phase Z current A is below normal. It may be the part itself, its connector or the wiring.
How do you clear P2C70?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2C70 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
