P2C0D: The cam profile gearbox actuator position sensor C circuit A (bank 1) is not
The cam profile gearbox actuator position sensor C circuit A (bank 1) is not working properly. It may be the sensor itself, its connector or the wiring.
| Code | P2C0D |
|---|---|
| System | Engine and transmission |
| Group | P2Cxx, Engine, emissions and electrification |
| Type | Generic: it means the same on every make |
How to read and clear P2C0D with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2C0D with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2C03 The fuel pressure regulator D control gives a lower signal than normal
- P2C04 The fuel pressure regulator D control gives a higher signal than normal
- P2C05 The cam profile gearbox actuator position sensor A circuit A (bank 1) is not
- P2C09 The cam profile gearbox actuator position sensor B circuit A (bank 1) is not
- P2C11 The AdBlue pump A current is below normal
- P2C12 The cam profile gearbox actuator position sensor A circuit B (bank 1) is not
- P2C16 The cam profile gearbox actuator position sensor B circuit B (bank 1) is not
- P2C1A The cam profile gearbox actuator position sensor C circuit B (bank 1) is not
What does code P2C0D mean?
The cam profile gearbox actuator position sensor C circuit A (bank 1) is not working properly. It may be the sensor itself, its connector or the wiring.
How do you clear P2C0D?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2C0D comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
