P2BB5: The engine 5 coolant temperature sensor fails now and then
The engine 5 coolant temperature sensor fails now and then. It is usually the part, its wiring or a connector with poor contact.
| Code | P2BB5 |
|---|---|
| System | Engine and transmission |
| Group | P2Bxx, Engine and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P2BB5 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2BB5 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2BAE The NOx control monitor has detected that the emissions limit was exceeded
- P2BB0 The alternative fuel consumption gives a lower signal than normal
- P2BB1 The alternative fuel consumption gives a higher signal than normal
- P2BB4 The engine 4 coolant temperature sensor fails now and then
- P2BB6 The engine 6 coolant temperature sensor has an electrical fault
- P2BB7 The engine 6 coolant temperature sensor gives readings outside the normal range
- P2BB8 The engine 6 coolant temperature sensor gives a lower signal than normal
- P2BB9 The engine 6 coolant temperature sensor gives a higher signal than normal
- P2BAC NOx exceedance: EGR deactivated
What does code P2BB5 mean?
The engine 5 coolant temperature sensor fails now and then. It is usually the part, its wiring or a connector with poor contact.
How do you clear P2BB5?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2BB5 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
