P2B7E: The evaporative emission system pressure sensor C fails now and then
The evaporative emission system pressure sensor C fails now and then. It is usually the part, its wiring or a connector with poor contact.
| Code | P2B7E |
|---|---|
| System | Engine and transmission |
| Group | P2Bxx, Engine and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P2B7E with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2B7E with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2B7A The evaporative emission system pressure sensor C has an electrical fault
- P2B7B The evaporative emission system pressure sensor C gives readings outside the
- P2B7C The evaporative emission system pressure sensor C gives a lower signal than
- P2B7D The evaporative emission system pressure sensor C gives a higher signal than
- P2B81 The wastegate position sensor A gives readings outside the normal range
- P2B82 The wastegate position sensor B gives readings outside the normal range
- P2B84 The intercooler coolant pump is turning slower than it should
- P2B85 The engine coolant pump is turning slower than it should
- P2BAC NOx exceedance: EGR deactivated
What does code P2B7E mean?
The evaporative emission system pressure sensor C fails now and then. It is usually the part, its wiring or a connector with poor contact.
How do you clear P2B7E?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2B7E comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
