P2898: The cylinder 3 ion current detection has an electrical fault
The cylinder 3 ion current detection has an electrical fault. It may be the part itself, its connector or the wiring.
| Code | P2898 |
|---|---|
| System | Engine and transmission |
| Group | P28xx, Transmission and engine |
| Type | Generic: it means the same on every make |
How to read and clear P2898 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2898 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2894 The cylinder 2 ion current detection has an electrical fault
- P2895 The cylinder 2 ion current detection gives readings outside the normal range
- P2896 The cylinder 2 ion current detection gives a lower signal than normal
- P2897 The cylinder 2 ion current detection gives a higher signal than normal
- P2899 The cylinder 3 ion current detection gives readings outside the normal range
- P289A The cylinder 3 ion current detection gives a lower signal than normal
- P289B The cylinder 3 ion current detection gives a higher signal than normal
- P289C The cylinder 4 ion current detection has an electrical fault
What does code P2898 mean?
The cylinder 3 ion current detection has an electrical fault. It may be the part itself, its connector or the wiring.
How do you clear P2898?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2898 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
