P26B5: The fuel lock valve B control circuit has got stuck
The fuel lock valve B control circuit has got stuck. It is usually dirt, wear or the motor that moves it.
| Code | P26B5 |
|---|---|
| System | Engine and transmission |
| Group | P26xx, Auxiliary outputs and cooling |
| Type | Generic: it means the same on every make |
How to read and clear P26B5 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P26B5 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P26B1 The engine coolant bypass valve A has got stuck
- P26B2 The engine coolant bypass valve B has got stuck
- P26B3 The fuel lock valve A control circuit has got stuck
- P26B4 The fuel lock valve A control circuit has got stuck
- P26B6 The fuel lock valve B control circuit has got stuck
- P26B7 The engine coolant bypass valve C control has a broken or disconnected wire
- P26B8 The engine coolant bypass valve C control gives a lower signal than normal
- P26B9 The engine coolant bypass valve C control gives a higher signal than normal
What does code P26B5 mean?
The fuel lock valve B control circuit has got stuck. It is usually dirt, wear or the motor that moves it.
How do you clear P26B5?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P26B5 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
