P2662: The rocker arm actuator B on bank 2 is stuck on
The rocker arm actuator B on bank 2 is stuck on.
| Code | P2662 |
|---|---|
| System | Engine and transmission |
| Group | P26xx, Auxiliary outputs and cooling |
| Type | Generic: it means the same on every make |
How to read and clear P2662 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2662 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P265E The position sensor signal for rocker arm actuator B on bank 1 is intermittent
- P265F The variable air conditioning compressor control gives readings outside the
- P2660 Rocker arm actuator B on bank 2 has an open circuit
- P2661 Rocker arm actuator B on bank 2 performs poorly or remains off
- P2663 The circuit signal of rocker arm actuator B on bank 2 is low
- P2664 The circuit signal of rocker arm actuator B on bank 2 is high
- P2665 The fuel lock valve B control has a broken or disconnected wire
- P2666 The fuel lock valve B control gives a lower signal than normal
What does code P2662 mean?
The rocker arm actuator B on bank 2 is stuck on.
How do you clear P2662?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2662 comes back.
