P2652: The rocker arm actuator B on bank 1 is stuck on
The rocker arm actuator B on bank 1 is stuck on.
| Code | P2652 |
|---|---|
| System | Engine and transmission |
| Group | P26xx, Auxiliary outputs and cooling |
| Type | Generic: it means the same on every make |
How to read and clear P2652 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2652 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P264D The circuit signal of rocker arm actuator position sensor A on bank 1 is high
- P264E The position sensor signal for rocker arm actuator A on bank 1 is intermittent
- P2650 Rocker arm actuator B on bank 1 has an open circuit
- P2651 Rocker arm actuator B on bank 1 performs poorly or remains off
- P2653 The circuit signal of rocker arm actuator B on bank 1 is low
- P2654 The circuit signal of rocker arm actuator B on bank 1 is high
- P2655 Rocker arm actuator A on bank 2 has an open circuit
- P2656 Rocker arm actuator A on bank 2 performs poorly or remains off
What does code P2652 mean?
The rocker arm actuator B on bank 1 is stuck on.
How do you clear P2652?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2652 comes back.
