P2625: The injector control pressure regulator gives a higher signal than normal
The injector control pressure regulator gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P2625 |
|---|---|
| System | Engine and transmission |
| Group | P26xx, Auxiliary outputs and cooling |
| Type | Generic: it means the same on every make |
How to read and clear P2625 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2625 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2621 The throttle position output gives a lower signal than normal
- P2622 The throttle position output gives a higher signal than normal
- P2623 The injector control pressure regulator has a broken or disconnected wire
- P2624 The injector control pressure regulator gives a lower signal than normal
- P2626 The lambda sensor pumping current trim (bank 1
- P2627 The lambda sensor pumping current trim (bank 1
- P2628 The lambda sensor pumping current trim (bank 1
- P2629 The lambda sensor pumping current trim (bank 2
What does code P2625 mean?
The injector control pressure regulator gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P2625?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2625 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
