P2576: The direct ozone reduction catalyst deterioration sensor circuit has an
The direct ozone reduction catalyst deterioration sensor circuit has an intermittent or erratic signal. The sensor, connector and wiring need checking.
| Code | P2576 |
|---|---|
| System | Engine and transmission |
| Group | P25xx, Auxiliary inputs and electrical system |
| Type | Generic: it means the same on every make |
How to read and clear P2576 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2576 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2572 There is a fault in the sensor that monitors deterioration of the direct ozone
- P2573 The direct ozone reduction catalyst deterioration sensor is out of range or not
- P2574 The direct ozone reduction catalyst deterioration sensor circuit has a low
- P2575 The direct ozone reduction catalyst deterioration sensor circuit has a high
- P2577 The direct ozone reduction catalyst is working below its required efficiency
- P2578 The turbocharger speed sensor has an electrical fault
- P2579 The turbocharger speed sensor gives readings outside the normal range
- P257A The vacuum tank control has a broken or disconnected wire
- P2563 Turbocharger boost control position sensor A range/performance
What does code P2576 mean?
The direct ozone reduction catalyst deterioration sensor circuit has an intermittent or erratic signal. The sensor, connector and wiring need checking.
How do you clear P2576?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2576 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
