P2532: The ignition switch circuit signal is too high in the on position
The ignition switch circuit signal is too high in the on position. Check the switch, connector and wiring.
| Code | P2532 |
|---|---|
| System | Engine and transmission |
| Group | P25xx, Auxiliary inputs and electrical system |
| Type | Generic: it means the same on every make |
How to read and clear P2532 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2532 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P252E The engine oil quality fails now and then
- P252F The engine oil level is above normal
- P2530 The ignition switch circuit has a fault for the on position
- P2531 The ignition switch circuit signal is too low in the on position
- P2533 The ignition switch circuit has a fault for the on and start positions
- P2534 The ignition switch circuit signal in the on or start position is too low
- P2535 The ignition switch circuit signal in the on or start position is too high
- P2536 The ignition switch accessory position has an electrical fault
- P2563 Turbocharger boost control position sensor A range/performance
What does code P2532 mean?
The ignition switch circuit signal is too high in the on position. Check the switch, connector and wiring.
How do you clear P2532?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2532 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
