P23A2: The exhaust heat exchanger exhaust bypass valve B control has a broken or
The exhaust heat exchanger exhaust bypass valve B control has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
| Code | P23A2 |
|---|---|
| System | Engine and transmission |
| Group | P23xx, Ignition coils and engine |
| Type | Generic: it means the same on every make |
How to read and clear P23A2 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P23A2 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P239A The diesel intake air flow B position sensor fails now and then
- P239B The diesel intake air flow B control motor current gives readings outside the
- P23A0 The lambda sensor exhaust sample (bank 1, sensor 2) is not working properly
- P23A1 The lambda sensor exhaust sample (bank 2, sensor 2) is not working properly
- P23A3 The exhaust heat exchanger exhaust bypass valve B control gives a lower signal
- P23A4 The exhaust heat exchanger exhaust bypass valve B control gives a higher signal
- P23A5 The exhaust heat exchanger exhaust bypass valve B control gives readings
- P23A6 The exhaust heat exchanger exhaust bypass valve B has got stuck
- P2300 Ignition coil A primary control circuit low
- P2301 Ignition coil A primary control circuit high
- P2303 Ignition coil B primary control circuit low
- P2304 Ignition coil B primary control circuit high
What does code P23A2 mean?
The exhaust heat exchanger exhaust bypass valve B control has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
How do you clear P23A2?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P23A2 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
