P2364: The cylinder 11 pressure variation gives a higher signal than normal
The cylinder 11 pressure variation gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P2364 |
|---|---|
| System | Engine and transmission |
| Group | P23xx, Ignition coils and engine |
| Type | Generic: it means the same on every make |
How to read and clear P2364 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2364 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2360 The cylinder 11 pressure sensor fails now and then
- P2361 The cylinder 11 pressure is below normal
- P2362 The cylinder 11 pressure is above normal
- P2363 The cylinder 11 pressure variation gives a lower signal than normal
- P2365 Combustion in cylinder 11 is not performing as expected
- P2366 The cylinder 12 pressure sensor has an electrical fault
- P2367 The cylinder 12 pressure sensor gives readings outside the normal range
- P2368 The cylinder 12 pressure sensor gives a lower signal than normal
- P2300 Ignition coil A primary control circuit low
- P2301 Ignition coil A primary control circuit high
- P2303 Ignition coil B primary control circuit low
- P2304 Ignition coil B primary control circuit high
What does code P2364 mean?
The cylinder 11 pressure variation gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P2364?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2364 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
