P2305: There is a fault in the secondary circuit of ignition coil B
There is a fault in the secondary circuit of ignition coil B.
| Code | P2305 |
|---|---|
| System | Engine and transmission |
| Group | P23xx, Ignition coils and engine |
| Type | Generic: it means the same on every make |
How to read and clear P2305 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2305 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2301 Ignition coil A primary control circuit high
- P2302 There is a fault in the secondary circuit of ignition coil A
- P2303 Ignition coil B primary control circuit low
- P2304 Ignition coil B primary control circuit high
- P2306 Ignition coil C primary control circuit low
- P2307 Ignition coil C primary control circuit high
- P2308 The secondary circuit of ignition coil C has a fault
- P2309 The primary ignition coil D control gives a lower signal than normal
- P2300 Ignition coil A primary control circuit low
What does code P2305 mean?
There is a fault in the secondary circuit of ignition coil B.
How do you clear P2305?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2305 comes back.
