P216F: The fuel injector unit F power supply voltage is above normal
The fuel injector unit F power supply voltage is above normal. It usually comes from the battery, the alternator or a poor connection.
| Code | P216F |
|---|---|
| System | Engine and transmission |
| Group | P21xx, Throttle, injection and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P216F with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P216F with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P216B The fuel injector unit E power supply voltage is below normal
- P216C The fuel injector unit E power supply voltage is above normal
- P216D The fuel injector unit F power supply voltage has a broken or disconnected wire
- P216E The fuel injector unit F power supply voltage is below normal
- P2170 The exhaust pressure regulator vent solenoid control gives a lower signal than
- P2171 The exhaust pressure regulator vent solenoid control gives a higher signal than
- P2172 The throttle control system detects a sudden excessive rise in airflow
- P2173 The throttle control system detects airflow that is too high
- P2100 Throttle actuator A control motor circuit open
- P2101 Throttle actuator A control motor circuit range or performance
- P2102 Throttle actuator A control motor circuit low
- P2104 Throttle control system: forced idle
What does code P216F mean?
The fuel injector unit F power supply voltage is above normal. It usually comes from the battery, the alternator or a poor connection.
How do you clear P216F?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P216F comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
