P0EED: The high voltage battery system discharge gives readings outside the normal
The high voltage battery system discharge gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | P0EED |
|---|---|
| System | Engine and transmission |
| Group | P0Exx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0EED with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0EED with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0EE9 The charge connector temperature sensor B gives a lower signal than normal
- P0EEA The charge connector temperature sensor B gives a higher signal than normal
- P0EEB The charge connector temperature sensor B fails now and then
- P0EEC The battery energy control unit B gives readings outside the normal range
- P0EEE The charge connector temperature B is above normal
- P0EEF The traction motor control unit A is getting too hot
- P0EF1 The traction motor temperature sensor C has an electrical fault
- P0EF2 The traction motor temperature sensor C gives readings outside the normal range
What does code P0EED mean?
The high voltage battery system discharge gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0EED?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0EED comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
