P0D22: The battery charger output current gives readings outside the normal range
The battery charger output current gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | P0D22 |
|---|---|
| System | Engine and transmission |
| Group | P0Dxx, Hybrid and electric: charging and battery |
| Type | Generic: it means the same on every make |
How to read and clear P0D22 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0D22 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0D1D The high voltage battery coolant B control valve control gives a lower signal
- P0D1E The high voltage battery coolant B control valve control gives a higher signal
- P0D20 The battery charger output voltage gives readings outside the normal range
- P0D21 The battery charger output voltage is below normal
- P0D24 The temperature of charger A is above normal
- P0D27 The battery charger input voltage is below normal
- P0D28 The battery charger input voltage is above normal
- P0D29 The battery charger input current is below normal
What does code P0D22 mean?
The battery charger output current gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0D22?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0D22 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
