P0CCD: The charging flap position sensor gives readings outside the normal range
The charging flap position sensor gives readings outside the normal range. It is usually the sensor itself, its wiring or a real fault in what it measures.
| Code | P0CCD |
|---|---|
| System | Engine and transmission |
| Group | P0Cxx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0CCD with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0CCD with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0CC9 The charging flap release switch gives a lower signal than normal
- P0CCA The charging flap release switch gives a higher signal than normal
- P0CCB The charging flap release switch fails now and then
- P0CCC The charging flap position sensor has an electrical fault
- P0CCE The charging flap position sensor gives a lower signal than normal
- P0CCF The charging flap position sensor gives a higher signal than normal
- P0CD0 The charging flap position sensor fails now and then
- P0CD1 The charging flap unlock control has an electrical fault
What does code P0CCD mean?
The charging flap position sensor gives readings outside the normal range. It is usually the sensor itself, its wiring or a real fault in what it measures.
How do you clear P0CCD?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0CCD comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
