P0BCC: The generator inverter temperature sensor has an electrical fault
The generator inverter temperature sensor has an electrical fault. It may be the part itself, its connector or the wiring.
| Code | P0BCC |
|---|---|
| System | Engine and transmission |
| Group | P0Bxx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0BCC with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0BCC with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0BC8 The high voltage battery cooling fan detection gives readings outside the
- P0BC9 The high voltage battery cooling fan detection gives a lower signal than normal
- P0BCA The high voltage battery cooling fan detection gives a higher signal than normal
- P0BCB The high voltage battery cooling fan detection fails now and then
- P0BCD The generator inverter temperature sensor gives readings outside the normal
- P0BCE The generator inverter temperature sensor gives a lower signal than normal
- P0BCF The generator inverter temperature sensor gives a higher signal than normal
- P0BD0 The generator inverter temperature sensor fails now and then
What does code P0BCC mean?
The generator inverter temperature sensor has an electrical fault. It may be the part itself, its connector or the wiring.
How do you clear P0BCC?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0BCC comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
