P0BBC: The hybrid battery voltage detection Z fails now and then
The hybrid battery voltage detection Z fails now and then. It is usually the part, its wiring or a connector with poor contact.
| Code | P0BBC |
|---|---|
| System | Engine and transmission |
| Group | P0Bxx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0BBC with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0BBC with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0BB8 The hybrid battery voltage detection Z has an electrical fault
- P0BB9 The hybrid battery voltage detection Z gives readings outside the normal range
- P0BBA The hybrid battery voltage detection Z gives a lower signal than normal
- P0BBB The hybrid battery voltage detection Z gives a higher signal than normal
- P0BBD The voltage difference between parts of the hybrid battery exceeds the
- P0BBE The cell voltages in the high voltage battery differ too much from each other
- P0BBF The high voltage battery cooling fan power supply voltage has a broken or
- P0BC0 The high voltage battery cooling fan power supply voltage is below normal
What does code P0BBC mean?
The hybrid battery voltage detection Z fails now and then. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0BBC?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0BBC comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
