P0B62: The hybrid battery voltage detection H fails now and then
The hybrid battery voltage detection H fails now and then. It is usually the part, its wiring or a connector with poor contact.
| Code | P0B62 |
|---|---|
| System | Engine and transmission |
| Group | P0Bxx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0B62 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0B62 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0B5E The hybrid battery voltage detection H has an electrical fault
- P0B5F The hybrid battery voltage detection H gives readings outside the normal range
- P0B60 The hybrid battery voltage detection H gives a lower signal than normal
- P0B61 The hybrid battery voltage detection H gives a higher signal than normal
- P0B63 The hybrid battery voltage detection I has an electrical fault
- P0B64 The hybrid battery voltage detection I gives readings outside the normal range
- P0B65 The hybrid battery voltage detection I gives a lower signal than normal
- P0B66 The hybrid battery voltage detection I gives a higher signal than normal
What does code P0B62 mean?
The hybrid battery voltage detection H fails now and then. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0B62?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0B62 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
