P0B14: The high voltage battery voltage detection B has an electrical fault
The high voltage battery voltage detection B has an electrical fault. It may be the part itself, its connector or the wiring.
| Code | P0B14 |
|---|---|
| System | Engine and transmission |
| Group | P0Bxx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0B14 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0B14 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0B10 The high voltage battery current sensor B gives a lower signal than normal
- P0B11 The high voltage battery current sensor B gives a higher signal than normal
- P0B12 The high voltage battery current sensor B fails now and then
- P0B13 The readings from hybrid battery current sensors A and B do not agree
- P0B15 The high voltage battery voltage detection B gives readings outside the normal
- P0B16 The high voltage battery voltage detection B gives a lower signal than normal
- P0B17 The high voltage battery voltage detection B gives a higher signal than normal
- P0B18 The high voltage battery voltage detection B fails now and then
What does code P0B14 mean?
The high voltage battery voltage detection B has an electrical fault. It may be the part itself, its connector or the wiring.
How do you clear P0B14?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0B14 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
