P0922: The gear shift advance actuator gives a lower signal than normal
The gear shift advance actuator gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P0922 |
|---|---|
| System | Engine and transmission |
| Group | P09xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P0922 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0922 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P091C The gear shift position circuit B gives a lower signal than normal
- P091D The gear shift position circuit B gives a higher signal than normal
- P0920 The forward gear shift actuator circuit is open
- P0921 The gear shift advance actuator gives readings outside the normal range
- P0923 The gear shift advance actuator gives a higher signal than normal
- P0924 The reverse gear actuator circuit is open
- P0925 The gear shift reverse gear actuator gives readings outside the normal range
- P0926 The gear shift reverse gear actuator gives a lower signal than normal
What does code P0922 mean?
The gear shift advance actuator gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0922?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0922 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
