P072F: The gearbox is stuck in gear 4
The gearbox is stuck in gear 4.
| Code | P072F |
|---|---|
| System | Engine and transmission |
| Group | P07xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P072F with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P072F with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P072B The gearbox is stuck in reverse
- P072C The gearbox is stuck in gear 1
- P072D The gearbox is stuck in gear 2
- P072E The gearbox is stuck in gear 3
- P0730 Incorrect gear ratio in the automatic gearbox
- P0731 Incorrect gear ratio in first gear
- P0732 Incorrect gear ratio in second gear
- P0733 Incorrect gear ratio in third gear
- P0700 Transmission control system: fault detected
- P0701 Transmission control system: range/performance
- P0702 Transmission control system: electrical fault
- P0703 Torque converter/brake switch B: circuit fault
What does code P072F mean?
The gearbox is stuck in gear 4.
How do you clear P072F?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P072F comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
