P06AD: The internal temperature sensor B circuit in the engine or gearbox control unit
The internal temperature sensor B circuit in the engine or gearbox control unit reads low. Check the part, connector and wiring.
| Code | P06AD |
|---|---|
| System | Engine and transmission |
| Group | P06xx, Control unit and auxiliary outputs |
| Type | Generic: it means the same on every make |
How to read and clear P06AD with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P06AD with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P06A8 The sensor reference voltage C gives readings outside the normal range
- P06A9 The sensor reference voltage D gives readings outside the normal range
- P06AA The internal temperature of engine or gearbox control unit B is too high
- P06AC The internal temperature sensor B circuit in the engine or gearbox control unit
- P06AE The internal temperature sensor B circuit in the engine or gearbox control unit
- P06AF The torque management has switched the engine off for safety
- P06B0 The sensor power supply A has a broken or disconnected wire
- P06B1 The sensor power supply A gives a lower signal than normal
- P0600 Serial communication link fault
- P0601 Internal control module memory checksum error
- P0602 Control module programming error
- P0603 Internal control module keep alive memory (KAM) error
What does code P06AD mean?
The internal temperature sensor B circuit in the engine or gearbox control unit reads low. Check the part, connector and wiring.
How do you clear P06AD?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P06AD comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
