P068C: The cylinder 7 glow plug control gives a lower signal than normal
The cylinder 7 glow plug control gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P068C |
|---|---|
| System | Engine and transmission |
| Group | P06xx, Control unit and auxiliary outputs |
| Type | Generic: it means the same on every make |
How to read and clear P068C with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P068C with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0688 ECM/PCM power relay sense: circuit open
- P0689 The engine control relay monitoring signal is low
- P068A The engine control relay switches off too early
- P068B The engine control relay switches off too late
- P068D The cylinder 7 glow plug control gives a higher signal than normal
- P068E The cylinder 8 glow plug control gives a lower signal than normal
- P068F The cylinder 8 glow plug control gives a higher signal than normal
- P0690 The engine control relay monitoring signal is high
- P0600 Serial communication link fault
- P0601 Internal control module memory checksum error
- P0602 Control module programming error
- P0603 Internal control module keep alive memory (KAM) error
What does code P068C mean?
The cylinder 7 glow plug control gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P068C?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P068C comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
