P0665: The variable intake valve control (bank 2) gives a higher signal than normal
The variable intake valve control (bank 2) gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P0665 |
|---|---|
| System | Engine and transmission |
| Group | P06xx, Control unit and auxiliary outputs |
| Type | Generic: it means the same on every make |
How to read and clear P0665 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0665 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0661 The variable intake valve control (bank 1) gives a lower signal than normal
- P0662 The variable intake valve control (bank 1) gives a higher signal than normal
- P0663 The variable intake valve control (bank 2) has a broken or disconnected wire
- P0664 The variable intake valve control (bank 2) gives a lower signal than normal
- P0666 There is a fault in the internal temperature sensor A circuit of the engine or
- P0667 The internal temperature sensor of the engine or gearbox control unit gives
- P0668 The internal temperature sensor of the engine or gearbox control unit gives a
- P0669 High signal from the internal temperature sensor of the control unit
- P0600 Serial communication link fault
- P0601 Internal control module memory checksum error
- P0602 Control module programming error
- P0603 Internal control module keep alive memory (KAM) error
What does code P0665 mean?
The variable intake valve control (bank 2) gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0665?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0665 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
