P061E: The internal control unit brake signal gives readings outside the normal range
The internal control unit brake signal gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | P061E |
|---|---|
| System | Engine and transmission |
| Group | P06xx, Control unit and auxiliary outputs |
| Type | Generic: it means the same on every make |
How to read and clear P061E with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P061E with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P061A The internal control unit torque gives readings outside the normal range
- P061B The engine control unit is calculating engine torque incorrectly
- P061C The internal control unit motor speed gives readings outside the normal range
- P061D The internal control unit motor air mass gives readings outside the normal range
- P061F The internal control unit throttle actuator controller gives readings outside
- P0620 Generator control: circuit fault
- P0621 Generator lamp L control: circuit fault
- P0622 Generator field F control: circuit fault
- P0600 Serial communication link fault
- P0601 Internal control module memory checksum error
- P0602 Control module programming error
- P0603 Internal control module keep alive memory (KAM) error
What does code P061E mean?
The internal control unit brake signal gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear P061E?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P061E comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
