P041A: The exhaust gas recirculation temperature sensor B has an electrical fault
The exhaust gas recirculation temperature sensor B has an electrical fault. It may be the part itself, its connector or the wiring.
| Code | P041A |
|---|---|
| System | Engine and transmission |
| Group | P04xx, Emissions control |
| Type | Generic: it means the same on every make |
How to read and clear P041A with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P041A with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0416 The secondary air injection system switching valve B has a broken or
- P0417 The secondary air injection system switching valve B has a short circuit
- P0418 Secondary air injection relay A circuit malfunction
- P0419 The secondary air injection system relay B has an electrical fault
- P041B The exhaust gas recirculation temperature sensor B gives readings outside the
- P041C The exhaust gas recirculation temperature sensor B gives a lower signal than
- P041D The exhaust gas recirculation temperature sensor B gives a higher signal than
- P041E The exhaust gas recirculation temperature sensor B fails now and then
- P0400 Exhaust gas recirculation (EGR) flow malfunction
- P0401 Exhaust gas recirculation (EGR) flow insufficient
- P0402 Exhaust gas recirculation (EGR) flow excessive
- P0403 EGR control circuit malfunction
What does code P041A mean?
The exhaust gas recirculation temperature sensor B has an electrical fault. It may be the part itself, its connector or the wiring.
How do you clear P041A?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P041A comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
