P012D: The turbocharger intake pressure sensor gives a higher signal than normal
The turbocharger intake pressure sensor gives a higher signal than normal. It is usually the sensor itself, its wiring or a real fault in what it measures.
| Code | P012D |
|---|---|
| System | Engine and transmission |
| Group | P01xx, Air and fuel metering |
| Type | Generic: it means the same on every make |
How to read and clear P012D with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P012D with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0129 The barometric pressure is below normal
- P012A The turbocharger intake pressure sensor has an electrical fault
- P012B The turbocharger intake pressure sensor gives readings outside the normal range
- P012C The turbocharger intake pressure sensor gives a lower signal than normal
- P012E The turbocharger intake pressure sensor fails now and then
- P012F Engine coolant temperature and engine oil temperature do not match each other
- P0130 Oxygen sensor (bank 1, sensor 1): circuit fault
- P0131 Oxygen sensor (bank 1, sensor 1): voltage too low
- P0100 Mass or volume air flow sensor circuit fault
- P0101 Air flow sensor range or performance problem
- P0102 Air flow sensor circuit low input
- P0103 Air flow sensor circuit high input
What does code P012D mean?
The turbocharger intake pressure sensor gives a higher signal than normal. It is usually the sensor itself, its wiring or a real fault in what it measures.
How do you clear P012D?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P012D comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
