P0080: The exhaust valve control (bank 1) gives a higher signal than normal
The exhaust valve control (bank 1) gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P0080 |
|---|---|
| System | Engine and transmission |
| Group | P00xx, Air, fuel and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P0080 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0080 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P007C Low signal from the air temperature sensor at the intercooler outlet
- P007D The intercooler temperature sensor (bank 1) gives a higher signal than normal
- P007E The intercooler temperature sensor (bank 1) fails now and then
- P007F The turbo intercooler temperature sensors for banks 1 and 2 disagree
- P0081 The intake valve control (bank 2) has an electrical fault
- P0082 Low signal in the intake variable timing solenoid of the second bank
- P0083 The intake valve control (bank 2) gives a higher signal than normal
- P0084 The exhaust valve control (bank 2) has an electrical fault
- P0010 Camshaft A actuator control: open circuit (bank 1)
- P0011 Camshaft A timing over-advanced (bank 1)
- P0012 Camshaft A timing over-retarded (bank 1)
- P0013 Camshaft B actuator control: open circuit (bank 1)
What does code P0080 mean?
The exhaust valve control (bank 1) gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0080?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0080 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
