P0072: Low signal from the outside temperature sensor
Low signal from the outside temperature sensor. It is usually the sensor, which sits behind the bumper, or its cable.
| Code | P0072 |
|---|---|
| System | Engine and transmission |
| Group | P00xx, Air, fuel and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P0072 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0072 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P006E The turbocharger boost control A power supply voltage is below normal
- P006F The turbocharger boost control A power supply voltage is above normal
- P0070 Ambient air temperature sensor circuit fault
- P0071 Ambient air temperature sensor range or performance problem
- P0073 The ambience air temperature sensor gives a higher signal than normal
- P0074 The ambience air temperature sensor fails now and then
- P0075 The intake valve control (bank 1) has an electrical fault
- P0076 Low signal in the intake variable timing solenoid
- P0010 Camshaft A actuator control: open circuit (bank 1)
- P0011 Camshaft A timing over-advanced (bank 1)
- P0012 Camshaft A timing over-retarded (bank 1)
- P0013 Camshaft B actuator control: open circuit (bank 1)
What does code P0072 mean?
Low signal from the outside temperature sensor. It is usually the sensor, which sits behind the bumper, or its cable.
How do you clear P0072?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0072 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
