P0068: Readings from the MAP pressure sensor
Readings from the MAP pressure sensor, MAF air mass meter and throttle position do not agree.
| Code | P0068 |
|---|---|
| System | Engine and transmission |
| Group | P00xx, Air, fuel and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P0068 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0068 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0064 The lambda sensor heater control (bank 2
- P0065 The control of the air-assisted injectors is not working within its range
- P0066 The air assisted injector control circuit has a fault or an electrically low
- P0067 The air assisted injector circuit signal is electrically too high
- P0069 Manifold pressure and barometric pressure do not match
- P006A The intake manifold pressure does not match the air measured by the air flow
- P006B The intake manifold pressure does not match the exhaust pressure
- P006C The MAP sensor and turbocharger or supercharger boost pressure sensor readings
- P0010 Camshaft A actuator control: open circuit (bank 1)
- P0011 Camshaft A timing over-advanced (bank 1)
- P0012 Camshaft A timing over-retarded (bank 1)
- P0013 Camshaft B actuator control: open circuit (bank 1)
What does code P0068 mean?
Readings from the MAP pressure sensor, MAF air mass meter and throttle position do not agree.
How do you clear P0068?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0068 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
