P0006: The fuel lock valve A control gives a lower signal than normal
The fuel lock valve A control gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P0006 |
|---|---|
| System | Engine and transmission |
| Group | P00xx, Air, fuel and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P0006 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0006 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0002 The fuel volume regulator of the high-pressure pump is not working within its
- P0003 The fuel volume regulator A control gives a lower signal than normal
- P0004 The fuel volume regulator A control gives a higher signal than normal
- P0005 Open circuit in the fuel shut-off valve
- P0007 The fuel lock valve A control gives a higher signal than normal
- P0008 The engine position system (bank 1) gives readings outside the normal range
- P0009 The engine position system (bank 2) gives readings outside the normal range
- P000A The camshaft A position (bank 1) responds slowly
- P0010 Camshaft A actuator control: open circuit (bank 1)
- P0011 Camshaft A timing over-advanced (bank 1)
- P0012 Camshaft A timing over-retarded (bank 1)
- P0013 Camshaft B actuator control: open circuit (bank 1)
What does code P0006 mean?
The fuel lock valve A control gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0006?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0006 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
