C05E5: The four-wheel drive clutch A position needs its learning procedure
The four-wheel drive clutch A position needs its learning procedure. It is solved at the workshop with a diagnostic tool.
| Code | C05E5 |
|---|---|
| System | Chassis |
| Group | C05xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C05E5 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C05E5 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C05E1 The four-wheel drive clutch A position sensor gives readings outside the normal
- C05E2 The four-wheel drive clutch A position sensor gives a lower signal than normal
- C05E3 The four-wheel drive clutch A position sensor gives a higher signal than normal
- C05E4 The four-wheel drive clutch A position sensor fails now and then
- C05E6 There is a fault in the four-wheel drive clutch A position control
- C05E7 The four-wheel drive clutch B actuator control has a broken or disconnected wire
- C05E8 The four-wheel drive clutch B actuator control gives readings outside the
- C05E9 The four-wheel drive clutch B actuator control gives a lower signal than normal
What does code C05E5 mean?
The four-wheel drive clutch A position needs its learning procedure. It is solved at the workshop with a diagnostic tool.
How do you clear C05E5?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C05E5 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
