C0573: The brake pressure sensor C has a broken or disconnected wire
The brake pressure sensor C has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
| Code | C0573 |
|---|---|
| System | Chassis |
| Group | C05xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0573 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0573 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C056F The brake booster travel sensor gives a lower signal than normal
- C0570 The brake booster travel sensor gives a higher signal than normal
- C0571 The brake pressure sensor C gives a lower signal than normal
- C0572 The brake pressure sensor C gives a higher signal than normal
- C0574 The brake pressure sensor C gives readings outside the normal range
- C0575 The brake pressure sensor D gives a lower signal than normal
- C0576 The brake pressure sensor D gives a higher signal than normal
- C0577 The brake pressure sensor D has a broken or disconnected wire
What does code C0573 mean?
The brake pressure sensor C has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
How do you clear C0573?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0573 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
