C0541: Brake pressure sensor B gives readings out of the normal range
Brake pressure sensor B gives readings out of the normal range. Braking aids may be limited.
| Code | C0541 |
|---|---|
| System | Chassis |
| Group | C05xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0541 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0541 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C053D The brake pressure sensor A gives readings outside the normal range
- C053E The brake pressure sensor A gives a lower signal than normal
- C053F The brake pressure sensor A gives a higher signal than normal
- C0540 The brake pressure sensor A has a broken or disconnected wire
- C0542 The brake pressure sensor B gives a lower signal than normal
- C0543 The brake pressure sensor B gives a higher signal than normal
- C0544 The brake pressure sensor B has a broken or disconnected wire
- C0547 The vacuum sensor power supply voltage has a broken or disconnected wire
What does code C0541 mean?
Brake pressure sensor B gives readings out of the normal range. Braking aids may be limited.
How do you clear C0541?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0541 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
