C053A: The ABS valves need calibrating
The ABS valves need calibrating. It is solved at the workshop with a diagnostic tool.
| Code | C053A |
|---|---|
| System | Chassis |
| Group | C05xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C053A with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C053A with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C0536 The engine control B has a broken or disconnected wire
- C0537 The engine control B gives a higher signal than normal
- C0538 The engine control B gives a lower signal than normal
- C0539 The engine control B power supply voltage has a broken or disconnected wire
- C053B The ABS valve power supply voltage has a broken or disconnected wire
- C053D The brake pressure sensor A gives readings outside the normal range
- C053E The brake pressure sensor A gives a lower signal than normal
- C053F The brake pressure sensor A gives a higher signal than normal
What does code C053A mean?
The ABS valves need calibrating. It is solved at the workshop with a diagnostic tool.
How do you clear C053A?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C053A comes back.
