C0069: There is a fault in the car’s yaw rate and longitudinal acceleration sensors
There is a fault in the car’s yaw rate and longitudinal acceleration sensors.
| Code | C0069 |
|---|---|
| System | Chassis |
| Group | C00xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0069 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0069 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C0062 The yaw rate sensor is not working properly
- C0063 The roll rate sensor is not working properly
- C0064 The roll rate sensor is not working properly
- C0065 The vertical acceleration sensor is not working properly
- C006A There is a fault in the car’s multi-axis acceleration sensor
- C006C The stability system is not working properly
- C0071 There is a fault in the signal indicating whether 2 or 4 wheel drive is active
- C0072 The brake temperature is above normal
What does code C0069 mean?
There is a fault in the car’s yaw rate and longitudinal acceleration sensors.
How do you clear C0069?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0069 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
