C0049: The brake fluid is not working properly
The brake fluid is not working properly. It may be the part itself, its connector or the wiring.
| Code | C0049 |
|---|---|
| System | Chassis |
| Group | C00xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0049 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0049 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C0044 The brake pressure sensor A is not working properly
- C0045 The brake pressure sensor B is not working properly
- C0047 The brake booster pressure sensor is not working properly
- C0048 The brake booster travel sensor is not working properly
- C0051 Fault in the steering wheel position sensor
- C0052 There is a fault in the steering wheel position sensor signal A
- C0053 There is a fault in the steering wheel position sensor signal B
- C0054 There is a fault in the steering wheel position sensor signal C
What does code C0049 mean?
The brake fluid is not working properly. It may be the part itself, its connector or the wiring.
How do you clear C0049?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0049 comes back.
