C0041: The brake pedal switch B is not working properly
The brake pedal switch B is not working properly. It is usually the switch itself or its wiring.
| Code | C0041 |
|---|---|
| System | Chassis |
| Group | C00xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0041 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0041 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C003C The rear ABS tone ring is not giving a clean signal
- C003D The rear wheel speed sensor is not working properly
- C003E The rear wheel speed sensor power supply is not working properly
- C0040 The brake pedal switch A is not working properly
- C0042 The brake pedal position sensor circuit A is not working properly
- C0043 The brake pedal position sensor circuit B is not working properly
- C0044 The brake pressure sensor A is not working properly
- C0045 The brake pressure sensor B is not working properly
What does code C0041 mean?
The brake pedal switch B is not working properly. It is usually the switch itself or its wiring.
How do you clear C0041?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0041 comes back.
