B309D: The right side crash sensor 4 is not working properly
The right side crash sensor 4 is not working properly. It may be the sensor itself, its connector or the wiring.
| Code | B309D |
|---|---|
| System | Body |
| Group | B30xx, Body |
| Type | Generic: it means the same on every make |
How to read and clear B309D with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see B309D with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- B3098 The right side crash sensor 3 is not working properly
- B309A The left side crash sensor 4 is not working properly
- B309B The left side crash sensor 5 is not working properly
- B309C The left side crash sensor 6 is not working properly
- B309E The right side crash sensor 5 is not working properly
- B309F The right side crash sensor 6 is not working properly
- B30A0 The occupant classification system is not working properly
- B30A1 The occupant position system is not working properly
What does code B309D mean?
The right side crash sensor 4 is not working properly. It may be the sensor itself, its connector or the wiring.
How do you clear B309D?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, B309D comes back.
