B3060: The driver seat belt voltage sensor is not working properly
The driver seat belt voltage sensor is not working properly. It may be the sensor itself, its connector or the wiring.
| Code | B3060 |
|---|---|
| System | Body |
| Group | B30xx, Body |
| Type | Generic: it means the same on every make |
How to read and clear B3060 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see B3060 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- B304B The front right third row 3 stage has an electrical fault
- B3050 The driver seat belt sensor is not working properly
- B3051 The first row central seat belt sensor is not working properly
- B3052 The passenger seat belt sensor is not working properly
- B3061 The passenger seat belt voltage sensor is not working properly
- B3070 The driver seat belt pretensioner A has an electrical fault
- B3071 The first row central seat belt pretensioner has an electrical fault
- B3072 The passenger seat belt pretensioner A has an electrical fault
What does code B3060 mean?
The driver seat belt voltage sensor is not working properly. It may be the sensor itself, its connector or the wiring.
How do you clear B3060?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, B3060 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
