B0049: There is a fault in deployment control for stage 1 of the third row right
There is a fault in deployment control for stage 1 of the third row right frontal restraint.
| Code | B0049 |
|---|---|
| System | Body |
| Group | B00xx, Body |
| Type | Generic: it means the same on every make |
How to read and clear B0049 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see B0049 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- B0041 There is a fault in deployment control for stage 1 of the third row left
- B0042 There is a fault in deployment control for stage 2 of the third row left
- B0043 There is a fault in deployment control for stage 3 of the third row left
- B0048 The deployment control for the third row right side airbag has a fault
- B004A There is a fault in deployment control for stage 2 of the third row right
- B004B There is a fault in deployment control for stage 3 of the third row right
- B0051 The centre seatbelt sensor in row 1 has a fault
- B0052 A safety device has been commanded to deploy
What does code B0049 mean?
There is a fault in deployment control for stage 1 of the third row right frontal restraint.
How do you clear B0049?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, B0049 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
