B0010: There is a fault in the passenger frontal airbag deployment control, stage 1
There is a fault in the passenger frontal airbag deployment control, stage 1.
| Code | B0010 |
|---|---|
| System | Body |
| Group | B00xx, Body |
| Type | Generic: it means the same on every make |
How to read and clear B0010 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see B0010 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- B0002 There is a fault in the driver frontal airbag deployment control, stage 2
- B0003 The driver frontal airbag stage 3 deployment control has a fault
- B0004 The driver knee airbag deployment control has a fault
- B0005 There is a fault in the collapsible steering column deployment control
- B0011 There is a fault in the passenger frontal airbag deployment control, stage 2
- B0012 The passenger frontal airbag stage 3 deployment control has a fault
- B0013 There is a fault in the deployment control for the passenger knee bolster
- B0020 There is a fault in the left side airbag deployment control
What does code B0010 mean?
There is a fault in the passenger frontal airbag deployment control, stage 1.
How do you clear B0010?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, B0010 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
