Opel Crossland 2017
Available readings for Opel Crossland 2017. Connect a compatible adapter to read fault codes and car data. Results depend on the engine and equipment.
82 brand readings.
What Final OBD reads on this car
82 brand readings.
Engine 1
- Accelerator pedal
- Air mass flow (MAF)
- Ambient temperature
- Barometric pressure
- Control unit temperature
- Coolant temperature
- Cruise control speed
- Engine speed
- Engine torque
- Fuel in tank (litres)
- Fuel level
- Fuel temperature
- Intake air temperature
- Oil pressure
- Oil temperature
- Radiator fan
- Requested torque
- Throttle
- Vehicle speed
Engine 2
- Control module voltage
Oil
- Oil level in percent
Turbo and intake
- Boost pressure (absolute)
- Charge air temperature
- Manifold pressure (MAP)
- Measured air
- Requested air flow
- Requested boost pressure (absolute)
- Requested intake air
- Turbo actuator
Fuel and injection
- Glow plug command
- Glow plugs
- Injected quantity
- Injection time
- Rail pressure
- Requested rail pressure
Mixture and lambda
- Oxygen sensor voltage
Catalyst
- Temperature after the catalytic converter
- Temperature before the catalytic converter
Particulate filter
- Average distance between regenerations
- Distance since last regeneration
- Filter ash in percent
- Filter differential pressure
- Filter mileage
- Oil dilution
- Regeneration requested
- Soot load
AdBlue and NOx
- AdBlue catalyst temperature
- AdBlue in tank (litres)
- AdBlue temperature
- NOx
EGR and exhaust
- EGR position
- Requested EGR position
Gearbox
- Gear selector position
- Gearbox output speed
- Torque converter slip
- Transmission oil temperature
Brakes and stability
- Brake booster vacuum
- Brake pedal
- Brake pressure
- Lateral acceleration
- Longitudinal acceleration
- Stability control active
- Steering angle
- Steering torque
- Wheel speed
- Yaw rate
12 V battery
- Alternator load
- Alternator target voltage
- Battery charge
- Battery current
- Battery temperature
- Battery voltage
Climate
- A/C compressor power
- Refrigerant pressure
Maintenance and kilometres
- Days since the last service
- Days to service
- Distance to service
- Engine starts
- Kilometres since the last oil change
- Kilometres since the last service
- Mileage
- Range
Standard OBD (43)
And always standard OBD: up to 43 standard readings, depending on what your car gives.
Engine 1
- Accelerator pedal
- Actual torque in percent
- Air mass flow (MAF)
- Ambient temperature
- Barometric pressure
- Coolant temperature
- Engine load
- Engine speed
- Fuel consumption
- Fuel level
- Ignition timing
- Intake air temperature
- Low fuel pressure
- Oil temperature
- Requested torque in percent
- Throttle
- Vehicle speed
Engine 2
- Control module voltage
Turbo and intake
- Boost pressure (absolute)
- Charge air temperature
- Manifold pressure (MAP)
- Requested boost pressure (absolute)
Fuel and injection
- Injection timing
- Rail pressure
Mixture and lambda
- Lambda
- Long term fuel trim
- Oxygen sensor voltage
- Short term fuel trim
Catalyst
- Catalyst temperature
Particulate filter
- Filter differential pressure
- Regeneration active
- Temperature after filter
- Temperature before filter
AdBlue and NOx
- AdBlue level
- NOx
EGR and exhaust
- EGR position
- EGR temperature
- Requested EGR position
High voltage battery
- High-voltage battery charge
Gearbox
- Gear
12 V battery
- Battery voltage
Maintenance and kilometres
- Engine hours
- Mileage
The app shows the readings your car provides, depending on its engine, year and equipment. They can vary from one car to another. This list keeps evolving: we remove readings that prove unreliable and keep adding new ones.
The app shows the readings your car provides, depending on its engine, year and equipment. They can vary from one car to another. This list keeps evolving: we remove readings that prove unreliable and keep adding new ones.