Skip to content
Google PlayApp Store

Fiat Ducato 250 2006 a 2014

Available readings for Fiat Ducato 250 2006 a 2014. Connect a compatible adapter to read fault codes and car data. Results depend on the engine and equipment.

Fiat Ducato

67 brand readings.

What Final OBD reads on this car

67 brand readings.

Engine 1

  • Accelerator pedal
  • Ambient temperature
  • Barometric pressure
  • Control unit temperature
  • Coolant temperature
  • Cruise control speed
  • Engine speed
  • Engine torque
  • Fuel consumption
  • Fuel level
  • Fuel temperature
  • Intake air temperature
  • Oil pressure
  • Oil temperature
  • Target idle speed
  • Throttle
  • Vehicle speed

Turbo and intake

  • Boost pressure (absolute)
  • Charge air temperature
  • Requested boost pressure (absolute)
  • Turbo actuator

Fuel and injection

  • Glow plug command
  • Glow plugs
  • Injected quantity in mm3
  • Injection time
  • Injection timing
  • Rail pressure
  • Requested rail pressure

Cylinders

  • Injector correction

Catalyst

  • Oxygen in the exhaust
  • Temperature before the catalytic converter

Particulate filter

  • Average distance between regenerations
  • Distance since last regeneration
  • Filter differential pressure
  • Filter load
  • Filter mileage
  • Filter temperature
  • Interrupted regenerations
  • Last regeneration duration
  • Regenerations completed
  • Temperature after filter

AdBlue and NOx

  • AdBlue in tank (litres)
  • AdBlue level
  • AdBlue quality
  • AdBlue range
  • AdBlue temperature

EGR and exhaust

  • EGR temperature

Gearbox

  • Clutch
  • Gearbox output speed
  • Torque converter slip
  • Transmission input speed
  • Transmission oil temperature

Brakes and stability

  • Brake pressure
  • Lateral acceleration
  • Longitudinal acceleration
  • Steering angle
  • Steering torque
  • Wheel speed
  • Yaw rate

12 V battery

  • Battery charge
  • Battery voltage

Climate

  • Refrigerant pressure

Maintenance and kilometres

  • Distance to service
  • Engine starts
  • Mileage
  • Oil life
  • Service interval in kilometres
Standard OBD (43)

And always standard OBD: up to 43 standard readings, depending on what your car gives.

Engine 1

  • Accelerator pedal
  • Actual torque in percent
  • Air mass flow (MAF)
  • Ambient temperature
  • Barometric pressure
  • Coolant temperature
  • Engine load
  • Engine speed
  • Fuel consumption
  • Fuel level
  • Ignition timing
  • Intake air temperature
  • Low fuel pressure
  • Oil temperature
  • Requested torque in percent
  • Throttle
  • Vehicle speed

Engine 2

  • Control module voltage

Turbo and intake

  • Boost pressure (absolute)
  • Charge air temperature
  • Manifold pressure (MAP)
  • Requested boost pressure (absolute)

Fuel and injection

  • Injection timing
  • Rail pressure

Mixture and lambda

  • Lambda
  • Long term fuel trim
  • Oxygen sensor voltage
  • Short term fuel trim

Catalyst

  • Catalyst temperature

Particulate filter

  • Filter differential pressure
  • Regeneration active
  • Temperature after filter
  • Temperature before filter

AdBlue and NOx

  • AdBlue level
  • NOx

EGR and exhaust

  • EGR position
  • EGR temperature
  • Requested EGR position

High voltage battery

  • High-voltage battery charge

Gearbox

  • Gear

12 V battery

  • Battery voltage

Maintenance and kilometres

  • Engine hours
  • Mileage

The app shows the readings your car provides, depending on its engine, year and equipment. They can vary from one car to another. This list keeps evolving: we remove readings that prove unreliable and keep adding new ones.

The app shows the readings your car provides, depending on its engine, year and equipment. They can vary from one car to another. This list keeps evolving: we remove readings that prove unreliable and keep adding new ones.

OBD guides