Fiat 500L 2012 a 2022
Available readings for Fiat 500L 2012 a 2022. Connect a compatible adapter to read fault codes and car data. Results depend on the engine and equipment.
74 brand readings.
What Final OBD reads on this car
74 brand readings.
Engine 1
- Accelerator pedal
- Actual torque in percent
- Ambient temperature
- Barometric pressure
- Coolant temperature
- Cruise control speed
- Engine load
- Engine speed
- Engine torque
- Exhaust temperature
- Fuel consumption
- Fuel level
- Fuel temperature
- Ignition timing
- Intake air temperature
- Oil temperature
- Requested torque
- Requested torque in percent
- Target idle speed
- Throttle
- Throttle angle
- Vehicle speed
Turbo and intake
- Boost pressure (absolute)
- Charge air temperature
- Manifold pressure (MAP)
- Requested boost pressure (absolute)
- Turbo actuator
Fuel and injection
- Glow plug command
- Glow plugs
- Injected quantity in mm3
- Injection time
- Injection timing
- Rail pressure
- Requested rail pressure
Cylinders
- Injector correction
- Knock retard
Catalyst
- Oxygen in the exhaust
- Temperature before the catalytic converter
Particulate filter
- Average distance between regenerations
- Distance since last regeneration
- Filter differential pressure
- Filter load
- Filter mileage
- Filter temperature
- Interrupted regenerations
- Last regeneration duration
- Regenerations completed
- Temperature after filter
AdBlue and NOx
- AdBlue level
- AdBlue quality
- AdBlue temperature
EGR and exhaust
- EGR temperature
Gearbox
- Clutch
- Clutch temperature
- Gear
- Gearbox output speed
- Torque converter slip
- Transmission input speed
- Transmission oil temperature
Brakes and stability
- Brake pressure
- Lateral acceleration
- Longitudinal acceleration
- Steering angle
- Steering torque
- Wheel speed
- Yaw rate
12 V battery
- Battery voltage
Climate
- Refrigerant pressure
Maintenance and kilometres
- Distance to service
- Engine starts
- Kilometres since the last service
- Mileage
- Oil life
- Service interval in kilometres
Standard OBD (43)
And always standard OBD: up to 43 standard readings, depending on what your car gives.
Engine 1
- Accelerator pedal
- Actual torque in percent
- Air mass flow (MAF)
- Ambient temperature
- Barometric pressure
- Coolant temperature
- Engine load
- Engine speed
- Fuel consumption
- Fuel level
- Ignition timing
- Intake air temperature
- Low fuel pressure
- Oil temperature
- Requested torque in percent
- Throttle
- Vehicle speed
Engine 2
- Control module voltage
Turbo and intake
- Boost pressure (absolute)
- Charge air temperature
- Manifold pressure (MAP)
- Requested boost pressure (absolute)
Fuel and injection
- Injection timing
- Rail pressure
Mixture and lambda
- Lambda
- Long term fuel trim
- Oxygen sensor voltage
- Short term fuel trim
Catalyst
- Catalyst temperature
Particulate filter
- Filter differential pressure
- Regeneration active
- Temperature after filter
- Temperature before filter
AdBlue and NOx
- AdBlue level
- NOx
EGR and exhaust
- EGR position
- EGR temperature
- Requested EGR position
High voltage battery
- High-voltage battery charge
Gearbox
- Gear
12 V battery
- Battery voltage
Maintenance and kilometres
- Engine hours
- Mileage
The app shows the readings your car provides, depending on its engine, year and equipment. They can vary from one car to another. This list keeps evolving: we remove readings that prove unreliable and keep adding new ones.
The app shows the readings your car provides, depending on its engine, year and equipment. They can vary from one car to another. This list keeps evolving: we remove readings that prove unreliable and keep adding new ones.